Description
Telex TR-800 UHF Two-Channel Wireless Beltpack – Wireless – Beltpack JACK F3 BAND
On/Off & Volume Control
Turns the beltpack power on and controls head set volume.
Wireless Talk Around (WTA)
When pressed
the user’s audio is disconnected from the wired intercom
auxiliary input/output and the base station’s local headset. Other beltpack users
on that audio channel
can hear the user as normal.
Stage Announce (SA)
When pressed
the user’s audio is routed to the stage announce connector on the back of the base station. The user also loses their sidetone as an indication that stage announce is activated. The other wireless beltpacks and wired users do not hear the user’s audio. The button is non-latching and activates the nearby red LED.
Audio Channel Select Button
Allows user to select either audio channel A or B.
Bat/Overmod Light (BAT/OM)
Light will flash once when unit is turned on if the battery is good. If the light stays on
battery is low. If the light does not flash
battery is dead. A normal microphone gain setting will cause the LED to flash at the beginning of most words at normal speech levels. If the gain is too high
the LED will be red during the complete word at normal speech levels.
Talk Light
LED is on when the talk button
SA or WTA is active.
Talk Button
Press to enable the audio path from the local headset microphone. The “TALK” LED
#6
will turn red when enabled. A quick press and release latches the talk function
unless latching has been disabled. Holding the button for over ¬Ω a second will cause the audio path to be enabled only for as long as the button is held. If the talk function is latched on
pressing the talk button again will turn it off.Product Type:Intercom Sub Station
Number of Channels:2
Power Source:Battery
Connectivity Technology:Wireless
Form Factor:Beltpack
Product Color:Black
Battery Size Supported:AA
Number of Batteries Supported:6
Manufacturer Part Number:TR-800-F3
Manufacturer Website Address:http://www.bosch.com
Manufacturer:The Bosch Group
Product Model:TR-800
Product Name:TR-800 UHF Two-Channel Wireless Beltpack
Additional Information:
- Binaural: No
- Current Draw: 140 mA Push-to-Talk
Talk On - Distortion: < 1 % at full deviation
- Frequency Response: 300 Hz-8 kHz
- Function: User Station
- IF Selectivity: 3 dB at 230 kHz
- Image Rejection: 70 dB or better
- Local Headset Output: 40 mW output into 600W 1% distortion
- Microphone Input Sensitivity: 7 mV
- RF Frequency Range: 470 – 608 MHz
614 – 740 MHz in 18 MHz TX and RX bands - RF Frequency Stability: 0.01 %
- RF Sensitivity: < 0.7 µV for 12 dB SINAD
- Squelch Quieting: 90 dB
- Squelch Threshold: 20 dB SINAD About 1.0 µV
- Type: Dual Conversion Super heterodyne
Synthesized
FM
712 channels - A4M Headset Jack
Package Contents:
Compatibility:Telex RadioCom BTR-800 Two-Channel UHF Synthesized Wireless Intercom Base Station
Certifications & Standards:FCC
Weight (Approximate):16 oz
Height:5.1″
Width:3.8″
Depth:1.7″