Description
Eaton Power-Sure 700 Line Conditioner – 208V AC
The Power-Sure 700 Three Phase Power Line Conditioning system provides exceptional system reliability that can be attributed to MGE’s microprocessor controlled zero-current cross tap switching technology. The Power-Sure 700 combines solid state, microprocessor based voltage regulation, with a multi-shield computer grade transformer and filter to remove transients and noise. The combined effect is a regulating and shielded isolation transformer/system that solves 99% of the electrical disturbance problems. The Power-Sure 700 protects your system against electrical brownouts, sags, surges, transients and other electrical disturbances. This power conditioner also provides the protection, efficiency, and reliability that are critical to every application with sensitive equipment.
Product Type:Line Conditioner
Protection Type:AC Noise|Brownout|AC Surge|Transient|Over Voltage|Overload|Sag
Manufacturer Part Number:TBL-300K-6
Manufacturer Website Address:http://www.eaton.com
Manufacturer:Eaton Corporation
Product Name:Power-Sure 700 Line Conditioner
Product Line:Power-Sure
Additional Information:
- 300kVA
- Input voltage range: +10% to -20%
- Output voltage range: ±3% Typical
- Efficiency: 97% Typical
95% minimum - Load power factor: 0.6 leading to 0.6 lagging
- Common-mode noise attenuation: 140 dB
- Normal-mode noise attenuation: -3 dB @ 1000 HZ
-40dB per decade - Total harmonic distortion: Less than 1% added
- Correction time: 1 Cycle typical
1.5 Cycle maximum - Overload rating: 200% for 10 seconds
1000% for 1 cycle - Audible noise: Less than 50dBA @1 meter (depending on size)
Certifications & Standards:
- UL 1012
- CSA
- FCC Class A certified
Weight (Approximate):4000 lb
Form Factor:Tower
Height:77″
Width:56″
Depth:41.5″
Input Voltage:208 V AC
Output Voltage:120 V AC